non destructive testing
Introduction to Non-Destructive Testing: A window to the future of industrial inspection
The importance of Non Destructive Testing (NDT) in industrial inspection to improve safety and quality.
November 5, 2024
Carlos Álvarez
Mechanical Engineer, with Level III certification by the American Society for Nondestructive Testing (ASNT) in Ultrasound and Radiography. He has more than 29 years of experience in the oil and gas sector in companies such as PDVSA and inspection services related to the oil sector..
Publications of Carlos Álvarez
non destructive testing
Inspection alternatives for air-cooled heat exchanger tubes
Author: Eng. Carlos Álvarez, February 27, 2024.
In the field of industrial maintenance and safety, Non Destructive Testing (NDT) methods represent the first line of defense against potential failures and hazards. Among the critical components that require meticulous inspection are the finned air-cooled exchanger tubes, key elements in various industries.
February 27, 2024
non destructive testing
Advanced techniques in corrosion mapping for aboveground storage tank bottoms through Guided Wave Beam Formation in Phases (GWPA)
The service life and reliability of Aboveground Storage Tanks depend on ensuring their structural integrity through corrosion mapping.
February 20, 2024
non destructive testing
Advances in corrosion detection with TFM and 3D analysis for accurate inspections
Author: Ing. Carlos Álvarez, February 12, 2024.
Corrosion poses significant challenges in various industries, leading to structural integrity problems, insecurity and economic losses. Traditional corrosion detection methods often do not provide such accurate and comprehensive assessments of corrosion damage. However, advances in ultrasound testing, particularly the Total Focus Method (TFM), have revolutionized the way material degradation is detected and analyzed in three dimensions (3D).
February 12, 2024
non destructive testing
Challenges and solutions in the inspection of stainless steel and dissimilar welds using Phased Array Ultrasound
In the field of Non-Destructive Testing (NDT), ensuring the integrity of critical components in industries such as oil and gas is essential. An advanced technique that has been gaining prominence is Phased Array Ultrasound Testing (PAUT), especially when applied to the examination of stainless steel welds.
January 22, 2024
non destructive testing
Pulsed Eddy Currents for the identification of corrosion in annular ring of storage tanks in service
Author: Ing. Carlos Álvarez, January 19, 2024.
In the field of industrial infrastructure, storage tanks play an important role in the storage of various liquids, from water to petrochemicals. Ensuring the structural integrity of these tanks is necessary to prevent leaks, environmental contamination and possible dangers. One area prone to corrosion is the annular ring, a critical component that supports the tank and maintains its stability.
January 19, 2024
non destructive testing
Integrity of submerged pipes: Evaluation with guided waves
Submerged pipelines are essential in various industries, and ultrasonic guided wave testing ensures their structural integrity.
January 17, 2024
