A 66 kV floating wind cable developed by TechnipFMC completed 1.5 million flex fatigue cycles during an 18 month qualification program designed to reproduce demanding North Sea conditions. The validation under CIGRE TB 862, independently verified by Bureau Veritas, seeks to reduce one of the technical risks associated with the electrical connection of floating wind turbines.
The development is significant because dynamic cables operate in an environment very different from systems installed on the seabed. A floating turbine moves continuously due to wind, waves and currents, transmitting movements and loads to the electrical system that connects it to the rest of the wind farm.
The integrity of these components is critical throughout the entire life of the asset. Dynamic cables and mooring systems in floating wind farms are exposed to cyclic loads and offshore conditions that affect their reliability.
Floating wind cable was tested for 18 months
The campaign subjected the floating wind cable to electrical testing, wet aging and 1.5 million flex fatigue cycles. TechnipFMC said that a full scale 66 kV DIAC (Dynamic Inter-Array Cable) was used and that Bureau Veritas independently verified the successful completion of the program.
The qualified design is a three core copper cable with double armor and double sheath, rated at 38/66 (72) kV and frequencies of 50 or 60 Hz. It can operate with a maximum conductor temperature of 90 °C, is designed for water depths of up to 350 meters and has a service life of 25 years.
The CIGRE TB 862 qualification adds to those previously obtained under CIGRE TB 722 and IEC 63026. For developers, having a previously tested design allows future project specific testing to focus on confirming its performance under particular conditions, rather than starting with an unproven technology.
Why is fatigue critical in floating wind?
The fundamental difference lies in movement. In a fixed bottom wind farm, inter-array cables remain essentially static on the seabed. In a floating installation, the cable must accommodate the movements of the structure for years without compromising its ability to transmit electricity.
This means withstanding tension, compression, bending and cyclic loads. Each movement may appear small in isolation, but its repetition over millions of cycles makes fatigue a central design variable.
In a floating system, the cable does not operate independently. Its mechanical response is linked to the movement of the platform and the surrounding marine conditions. Demonstrating its performance under repeated loads therefore provides greater confidence in a component that must preserve both its mechanical integrity and electrical transmission capability throughout years of operation. This requirement explains why the qualification of a floating wind cable combines electrical testing with mechanical and fatigue testing.
Water depth adds another variable to the design. The TechnipFMC DIAC is qualified to operate in water depths of up to 350 meters, while its expected service life reaches 25 years. During that period, the system will be repeatedly exposed to movement from the floating structure and marine conditions. For this reason, the 1.5 million flex fatigue cycles provide technical evidence of the designs resistance before its deployment in commercial projects.
The challenge increases as projects move into deeper waters and floating configurations. Technologies such as Squid seek to integrate mooring connections and electrical cables to simplify the subsea interfaces of floating wind turbines.
From a standalone cable to an integrated offshore system
TechnipFMC plans to use the DIAC within its Water Column iEPCI model, which integrates the dynamic cable, mooring system, anchors and offshore installation under a single engineering, procurement, construction and installation scope.
The approach is to address from the design stage the interaction between elements that would normally be contracted as separate packages. In a floating turbine, cable performance depends on platform movements, mooring configuration, environmental conditions and the installation method. A modification to one of these components can transfer new loads to the others.
This integration is becoming increasingly important in a market where subsea electrical infrastructure is expanding alongside offshore wind capacity. Demand for subsea cables and specialized vessels is increasing as new offshore wind projects advance.
The DIAC will be manufactured at the TechnipFMC facility in Newcastle, United Kingdom, drawing on the plants experience in dynamic umbilical systems. More than an isolated endurance test, the 1.5 million fatigue cycles provide a reference for how the industry is seeking to demonstrate the reliability of components that will have to operate for decades while remaining in motion under severe marine conditions.
Source: TechnipFMC