Table of Contents
As an ASNT Level III, CWI, and dual-certified API inspector, I have worked across multiple industries and seen firsthand how nondestructive testing data is used. Every industry has its own requirements, but one difference has always stood out: some industries use NDT data to improve engineering decisions, while others treat it mainly as a quality gate.
In my experience, the oil and gas industry (particularly the downstream sector) has an opportunity to gain much more value from the NDT data it already collects.
Corrosion monitoring is one of the most important uses of NDT in oil and gas. However, the resulting data is only useful when it can be trusted. Thickness readings may be affected when monitoring locations drift, surface conditions change, temperatures vary, equipment is used inconsistently, or technicians are not given clear expectations.
The problem often becomes obvious when a new thickness reading is greater than the previous one. Congratulations: your piping system appears to be growing.
Of course, the pipe did not grow. One or both readings may be inaccurate, the measurements may have been taken at slightly different locations, or the inspection conditions may have changed. Whatever the cause, time and money have been spent collecting data that may not support a reliable corrosion-rate calculation.
The asset owner is then left making integrity decisions with incomplete or questionable information.
NDT is capable of providing significant value to inspection, engineering, and asset-integrity programs, but that value does not come from collecting numbers alone. Reliable data requires clear expectations, consistent methods, qualified personnel, and active involvement from the asset owner.
Before work begins, the purpose of the examination should be understood. Is the technician simply being asked to record a thickness value, or is the information intended to support corrosion trending, remaining life calculations, or future inspection planning?
These objectives may require different levels of detail.
A narrowly written scope can also limit what a capable technician is able to report. For example, a technician may be instructed to collect a single reading at a designated location even when a short scan of the surrounding area could reveal localized corrosion or confirm that the correct location has been examined.
The solution is not to give technicians unlimited authority or allow the scope to expand without control. The solution is to clearly define what information is important, what conditions should be reported, and when unusual results require additional verification.
Technician competency is also an important part of reliable data. Certification provides a necessary foundation, but certification alone does not guarantee that every technician will perform every task consistently.
Technicians should understand the procedure, the equipment, the component being examined, and the reason the data is being collected. Practical competency should be demonstrated rather than assumed. Programs such as the ISQ exam are examples of the industry recognizing a data-quality problem, defining clearer expectations, and requiring technicians to demonstrate their abilities.
However, competency testing is only one part of the solution. When questionable data is identified, the technician should not automatically receive all the blame. The procedure, equipment, calibration, surface condition, temperature, previous readings, and exact examination location should also be reviewed.
Reliable NDT data is the result of a reliable system.
Modernizing NDT does not necessarily mean adding complicated technology or creating more paperwork. It means improving how information is collected, reviewed, stored, and used.
A thickness reading becomes more valuable when it is connected to basic supporting information, such as the component location, date, technician, equipment, temperature, surface condition, and method used. Photographs, location markings, digital records, and saved instrument data can provide additional confidence when questions arise later.
Simple validation steps can also prevent bad information from entering an inspection database. If a new reading is significantly different from the previous reading, the result should be verified before it is used to calculate a corrosion rate. The location can be confirmed, the equipment checked, the measurement repeated, and nearby areas examined when necessary.
These steps require some additional effort, but they are far less costly than making repair, replacement, or inspection-planning decisions based on unreliable information.
The oil and gas industry should reexamine how it views the capabilities of NDT.
NDT data should not be treated as a collection of isolated readings or reports that are filed away after the work is completed. It should be treated as an asset that supports long term decision making.
That requires trained and certified professionals, demonstrated competency, clearly written scopes, consistent data collection, and better communication among asset owners, inspectors, engineers, and NDT technicians.
The industry does not simply need more data. It needs data that can be trusted.
This article was developed by Kendall Brice from OOGA TECHNOLOGIES and published as part of the ninth edition of Inspenet Brief magazine October 2026, dedicated to technical content of the energy and industrial sector.