The global knowledge network for professionals in the energy and industry

Beyond Inspection: Intelligent NDT for the Future of Asset Integrity

The future of pipeline integrity is not simply about inspecting more; it is about knowing more sooner and with greater confidence.
A technician performing a non-destructive inspection of industrial piping using ultrasonic technology, artificial intelligence, and corrosion monitoring.

Corrosion remains a major threat to oil and gas plant piping, particularly Corrosion Under Insulation (CUI), where degradation can develop beneath insulation while remaining concealed from direct visual examination. Moisture ingress, condensation, temperature cycling, and environmental exposure can create conditions conducive to external corrosion.

Conventional inspection remains essential, but periodic inspection provides a condition assessment at a specific point in time. The condition of piping and its environment can change between inspection events.

This creates a fundamental integrity question:

¿What is happening to the piping between inspections?

This is where Intelligent NDT can provide an additional layer of asset awareness by combining Guided Wave Testing (GWT), repeated or permanently installed monitoring, complementary sensing, digital data acquisition, and engineering assessment.

The objective is not to replace conventional inspection.

It is to make inspection more targeted, better informed, and more responsive to change.

Guided Wave Testing for Insulated Plant Piping

Guided Wave Testing is particularly valuable for long-range screening and localization of applicable aboveground plant piping.

ISO 18211:2016 specifies long-range GWT using axially propagating guided waves for applicable carbon and low-alloy steel aboveground pipelines and plant piping, including painted and insulated piping. It defines GWT as a qualitative screening and localization method for probable corrosion and erosion.

ASTM E2775-16(2023) similarly establishes GWT as a screening technique. It does not directly measure wall thickness or provide exact defect dimensions; indications requiring further assessment should therefore be evaluated using appropriate complementary NDT methods.

This makes GWT particularly valuable for insulated piping, elevated pipework, supports, congested process areas, and other locations where conventional access may be difficult or disruptive.

The inspection strategy is therefore:

GWT → Screen and localize.

UT/PAUT or other appropriate NDT → Characterize.

Engineering assessment → Determine significance and action.

From Periodic Inspection to Intelligent Monitoring

The value of GWT can be extended when it is combined with repeated or permanently installed monitoring.

Engineer evaluating the integrity of industrial assets using artificial intelligence, pipeline monitoring, corrosion analysis, and predictive models.
Artificial intelligence and data analysis make it possible to detect anomalies, assess corrosion risks, and anticipate potential failures in industrial pipelines, thereby strengthening predictive maintenance strategies. Source: M. Abufour.

A baseline can be established and subsequent measurements compared over time. This enables integrity teams to identify meaningful changes that may justify targeted investigation, rather than relying solely on individual inspection snapshots.

For CUI-prone piping, this can help address critical questions:

• Is the monitored condition changing?

• Where should detailed inspection be focused?

• Does the change justify insulation removal?

• What follow-up NDT is required?

The objective is not to eliminate conventional inspection or insulation removal.

It is to use better information to determine where and when those activities are most justified.

Promising Field-Trial Results

The technology is currently undergoing field trials under representative operating and environmental conditions, with results so far showing favorable performance for the inspection and monitoring of insulated plant piping. These trials have demonstrated positive outcomes over extended piping sections, while development and validation are continuing toward a 50 to 100 m monitoring range, depending on application conditions.

The 50 to 100 m range is a current development and validation objective, not a guaranteed or universally achievable monitoring distance. Actual GWT performance is application-dependent and may be influenced by pipe material and geometry, diameter and wall thickness, temperature, attenuation, coatings, insulation, supports, welds, bends, branches, sensor configuration, signal-to-noise ratio, and the type, size, and location of the condition being evaluated.

Ongoing field trials are focused on establishing repeatability, reliability, detection capability, monitoring stability, and practical operating limits across representative plant-piping conditions.

Monitoring Beyond Corrosion

Intelligent NDT can incorporate complementary sensors to provide additional information about conditions surrounding insulated piping.

Where relevant to the monitoring objective, humidity and vibration can be monitored alongside GWT.

Industrial inspection using ultrasonic guided waves to detect corrosion under insulation (CUI) and assess pipeline integrity through long-range monitoring.
Ultrasonic guided-wave technology makes it possible to identify potential corrosion damage under insulation and to assess long sections of industrial piping without the need to completely remove the insulation/cladding. Source: M. Abufour

Humidity measurements can provide additional information about moisture conditions associated with the insulation environment, while vibration measurements can provide complementary information about mechanical or operational conditions.

These parameters do not replace corrosion inspection or GWT. They provide contextual information that can be evaluated alongside GWT results, inspection history, and operating data.

The integrated concept is:

GWT → Long-range screening and localization
Humidity → Environmental condition awareness
Vibration → Mechanical/operational condition awareness
UT/PAUT → Local characterization
Engineering → Integrity assessment and decision

From Data to Engineering Intelligence

Repeated monitoring generates time-based information that can support trend analysis and change detection.

Digital systems can connect GWT, humidity, and vibration data with inspection history, operating conditions, and engineering assessments.

AI and advanced analytics can further support anomaly detection, pattern recognition, trend analysis, and prioritization of locations requiring attention.

However, AI remains a decision-support capability, not a replacement for qualified NDT personnel, corrosion engineers, or integrity professionals.

The strength of Intelligent NDT lies in combining:

NDT evidence + monitoring data + engineering knowledge + asset history = better-informed integrity decisions.

Beyond Inspection

The future of insulated plant-piping integrity will not be defined by a single inspection technology. It will be defined by integration.

GWT can provide long-range screening and localization. Targeted UT, PAUT, or other appropriate NDT can characterize areas of interest. Humidity and vibration monitoring can provide complementary environmental and mechanical information. Digital systems can connect the data, while engineering assessment converts the evidence into an integrity decision.

The philosophy is simple:

Monitor broadly. Detect meaningful change. Investigate intelligently. Characterize precisely. Act on evidence.

The fundamental question changes from:

“When was this pipe last inspected?” to: “What do we know about its condition now, how has it changed, and where should we focus our next inspection?”

That is Beyond Inspection. It is not a replacement for inspection. It is the evolution from periodic inspection toward intelligent inspection and monitoring, using GWT and complementary sensing to reduce uncertainty, focus inspection resources, and strengthen confidence in integrity decisions for critical insulated plant piping.

The future is not simply more inspection.

Industrial refinery connected via digital technologies for continuous monitoring, early fault detection, and predictive management of asset integrity.
Industrial refinery connected via digital technologies for continuous monitoring, early fault detection, and predictive management of asset integrity. Source: M. Abufour.

The future is better information, earlier evidence, and smarter integrity decisions.


This article was developed by Mohammed A. Abufour Global advisor, and published as part of the ninth edition of Inspenet Brief magazine October 2026, dedicated to technical content of the energy and industrial sector.

Verified Author

Graduated from the University of Northampton (UK) with a bachelor’s degree in Nondestructive Testing. He is a Lifetime Member of ASNT with over 41 years of experience in the oil and energy industry. Mohammed’s career has been defined by overcoming inspection challenges, gaining invaluable insights from setbacks, and achieving significant milestones. From his early pursuit of top-tier NDT training abroad to his current role as an Advanced NDT Technologies Engineering Specialist, he has consistently contributed to innovative NDT techniques that push the boundaries of conventional practices.